Advanced multicore hardware platforms are nowadays finding their irreversible way into every electronic device manufactured. These platforms are currently programmed manually, which is difficult, time-consuming and error-prone. With the number of processor cores continuously rising, the software design complexity continues to explode. Without Software Design Automation tools, this challenge can’t be solved. The award-winning SLX Tool Suite is an automated software development tool for Multicore Software Developers and HW/SW System Architects.
Valens is the world leader in HDBaseT technology, and is a top provider of semiconductor products for the distribution of ultra-high-definition multimedia content. The company’s award-winning HDBaseT technology enables long-reach connectivity of devices over a single cable and is a global standard for advanced digital media distribution. HDBaseT has been widely deployed in the audio-video markets, and has made significant inroads in the automotive sector, where it simplifies and optimizes in-vehicle connectivity.
HDBaseT Automotive enables simultaneous tunneling of multi-Gigabit, bi-directional,
simultaneous streams of high-definition video & audio, data, USB, and power, over a single, low-cost, unshielded twisted cable (for up to 15m), while guaranteeing top performance and low latency.
NovAtel® designs, manufactures and sells high precision Global Navigation Satellite Systems (GNSS) components and subsystems to a wide range of driverless positioning applications, based on proven technology that delivers sub-decimetre level accuracy. We are an ISO9001 certified company with an extensive product line of receivers, antennas, correction signals, positioning algorithms, sensor fusion solutions, and systems that fulfill specific safety requirements of the automotive industry such as ISO26262 (ASIL). NovAtel’s technology not only delivers positioning solutions based on signals from satellite constellations but also uses vehicle behavior modeling and inertial sensor integration to improve accuracy and greatly reduce interruptions in availability. With customer-focused innovation as a fundamental NovAtel protocol, our customers can be confident we will deliver solutions to keep them at the leading edge of their industry.
NXP Semiconductors N.V. enables secure connections and infrastructure for a smarter world, advancing solutions that make lives easier, better and safer. As the world leader in secure connectivity solutions for embedded applications, NXP is driving innovation in the secure connected vehicle, end-to-end security and privacy and smart connected solutions markets.
understand.ai provides the high-quality training and validation data to enable mobility companies to develop with confidence computer vision and machine learning models that reliably and safely power autonomous vehicles. Our advanced capabilities include segmentation and bounding box annotations for LiDAR and video, with specific meta-attributes and instance IDs for object tracking. By applying specialized AI technology and continuous quality improvement to accurately and quickly annotate millions of images, we accelerate production of the ground-truth required to make autonomous driving a reality. understand.ai is headquartered in Karlsruhe, Germany and has offices in Berlin and San Francisco. Our engineers have relevant experience gained at innovative companies such as BMW, Google, Mercedes-Benz.
TTTech Computertechnik AG – Automotive provides solutions for the challenges of future vehicle generations. Those challenges include the increasing connectivity inside and outside of automobiles as well as the growing safety and robustness demands regarding electronics. This especially includes safety-relevant areas of vehicle dynamics as well as advances driver assistance systems. TTTech Computertechnik AG – Automotive brings networking scalability and flexibility to automotive customers and enables safe communication and networking – up to SIL 3/ASIL D – for systems with different safety requirements according to IEC 61508 and ISO 26262. The product range includes modular hardware and software solutions based on certified safety modules as well as effective system solutions for electric and conventional vehicles. TTTech Computertechnik AG – Automotive also develops reliable testing devices for bus systems such as FlexRay, Deterministic Ethernet (TSN, TTEthernet), MOST and CAN.
BASELABS provides data fusion software for prototyping and series implementation in automotive applications. With our development software and project support, we enable data fusion results. Our customers are leading OEM, tier 1 and tier 2 suppliers as well as engineering service companies and academic institutions.
As an innovation driver for virtual test driving, the company is a leading global provider of software and hardware products for the automotive and supplier industry. With the areas Simulation Software, Real-time Hardware, Test Systems and Engineering Services, IPG Automotive supports its customers in creating innovations and shaping their development process efficiently.
The innovative solutions CarMaker, TruckMaker, and MotorcycleMaker, as open integration and test platforms, facilitate great savings in time and cost for customers, in a continuous development process of Model-, Software- and Hardware-in-the-Loop, all the way to the Vehicle-in-the-Loop method. The application ranges from the vehicle dynamics simulation, developing and testing of chassis control systems, to interconnected systems such as chassis, powertrain and steering. One of the biggest strengths of IPG Automotive is the integration and testing of all kinds of advanced driver assistance systems within IPG’s future-oriented solutions.
Speedgoat is a company specializing in state of the art real-time systems for real-time testing using Simulink® and Simulink Real-Time™, the real-time operating system from MathWorks.
Together, our solutions allow our customers to continuously verify and validate their designs along a complete Model-Based Design workflow including requirements specification, simulation, Rapid Controller Prototyping, Hardware-in-the-Loop (HIL) simulation, and deployment.
High quality, feature-richness and high usability are achieved by applying our expert skills to every system we build. And with technical support and hardware warranties we guarantee you won’t be left on your own.
Speedgoat was incorporated in the beginning of 2007 by former MathWorks employees and has its headquarters in Bern, Switzerland. Together with MathWorks and our distributors we serve high-tech companies world-wide. Around 40% of our customers are in Europe, the Middle East and Africa, 40% in the Americas, and 20% in Asia-Pacific.
We are proud that our customers are engineers developing next generation technology.
Founded in 1983 and headquartered in Silicon Valley, Velodyne is a technology company known worldwide for its real-time 3D LiDAR sensors. The company evolved after founder/inventor David Hall developed the HDL-64 Solid-State Hybrid LiDAR sensor in 2005. Since then, Velodyne LiDAR Inc. emerged as the unmatched market leader of real-time 3D vision systems used in a variety of commercial applications including autonomous vehicles, vehicle safety systems, mobile mapping, aerial mapping, and security. Its products range from the high-performance, surround view Ultra-Puck™ VLP-32, classic HDL-32/64 and cost-effective VLP-16, to the upcoming, hidden Velarray™. Velodyne’s rich suite of perception software and algorithms are the key enablers of its perception systems.Velodyne is the industry standard for localization and environmental perception, providing the core technology for dozens of autonomous vehicle programs in over 10 countries.
TomTom empowers movement. Every day millions of people around the world depend on TomTom to make smarter decisions. We design and develop innovative products that make it easy for people to keep moving towards their goals. Best known for being a global leader in navigation and mapping products, TomTom also creates GPS Sport Watches, as well as state-of-the-art fleet management solutions and industry leading location based products. Our business consists of four customer facing business units: Consumer, Automotive, Licensing and Telematics. Founded in 1991 and headquartered in Amsterdam, we have 3,600 employees worldwide and sell our products in over 35 countries. Find out more at automotive.tomtom.com Got a question?
iMAR, a world leading provider of solutions in navigation, stabilization, guidance and control for all defense, geodetic, industrial and automotive applications based in Germany.
iMAR Navigation GmbH, is a specialist in inertial navigation technology and has extensive long-time experience in conception, development, production, maintenance, and support of inertial measuring and navigation systems destined to a wide range of standard and special applications in various fields like surveying, stabilisation, guidance, control and defence. iMAR was founded in 1992 in St. Ingbert (Germany), where it has its headquarters and production facilities (1.500 sq.m / 16,000 sq.ft).
iMAR´s advanced manufacturing and integration infrastructure: turntables and temperature lab, vibration and shock testing lab, 3-axes and 5 axes CNC machine tools, all in house do build a solid base for development and manufacturing.
Three key elements make a sound basis for developing our advanced inertial measuring systems – know-how, expertise and in-depth knowledge of inertial measuring technologies, navigation algorithms, sensor systems, propulsion technologies, hydraulics, mechatronics and process calculation systems, as well as hardware design, firmware design and software engineering.
iMAR products are used throughout the automotive industry when precise and reliable measurements are required. Starting with vehicle dynamics in the beginning and covering the full range of ADAS testing and validation today. Whenever and wherever measurement need to be taken iMAR´s products will be the most reliable and accurate solution.
iMAR does also provide development and design support, software as well as hardware for future vehicle systems and functionality to major automotive customers.
dSPACE develops and distributes tools for the development of electronic control units (ECUs) and mechatronic systems worldwide. The company was one of the pioneers that opened up this market segment over 25 years ago, and has remained one of its driving forces to this day.
dSPACE systems enable you to reduce development times and costs dramatically when you design ECUs and controllers, which systematically increases your productivity. This is possible because dSPACE provides an optimal mix of standard solutions for rapid control prototyping, automatic production code generation, and hardware-in-the-loop simulation. Moreover, dSPACE offers comprehensive services from on-site user training to customer-specific system engineering such as turn-key HIL test systems.
Whether they are working on electronic combustion engine controls, alternative drives or modern driver assistance systems – virtually all international car makers and many of their suppliers rely on dSPACE hardware and software in their current development projects. For developing advanced driver assistance systems, dSPACE offers a well-coordinated tool chain, in which hardware and software tools interact smoothly throughout all the development steps. No matter whether you are integrating environment sensors or V2X communication, modeling vehicles and traffic scenarios, or running virtual test drives.
Dedicated employees are the basis of our success. Today, dSPACE has over 1,200 employees worldwide, at locations in Germany, the USA, France, the UK, Japan, and China. In addition, numerous distributors provide customer support in other countries.